With over 40 years of experience in the garage door industry, Linear
Residential Garage Door Operators are engineered and built specifically
for the garage door professional. The heads and rails are completely
interchangeable with Linear's modular design. Between two head designs,
two rail types, and three rail lengths, there are 12 different combinations available
to satisfy virtually any residential application.
LDO50 Deluxe Model
The LDO50 is a high
quality, heavy duty 1/2 Deluxe Single Lamp Garage Door Operator that is
designed to provide years of trouble free service on even the most
difficult applications.
Deluxe Model LDO50
Features
1/2 HP
Three Button Remote Control
Deluxe wall station
Belt drive or chain drive
Open/Close/Park Door in EITHER direction
Rustproof rolled steel T-rail construction
Automatic Courtesy Light
Warranty: Lifetime on Motor; 5 years on Mechanical; 1 year on Electronics
Belt Drive or chain drive
Choose from our exceptionally quiet belt drive or our solid-performing chain drive.
Safety first, safety always
Any time the obstacle sensing beam is crossed, the door reverses to the full open position.
Park or reverse door
To permit both ventilation and access, the garage door can be stopped and parked during either upward or downward travel.
Secure, responsive remote control
Linear remote controls operate over a long range and employ high
security technology to prevent anyone from stealing your code and using
it to gain entrance to your home.
Deluxe wall station
All controls are large and clearly marked ( UP/DOWN control,
courtesy light switch and vacation mode). Illumination for finding the
wall station in the dark.
Automatic courtesy light
A built-in 100W MAX light illuminates the garage for five minutes every time the operator is used.
Easy door release
When you need to open or close the garage door manually, simply release the operator's quick-release trolley.
Assurance through self checks
The operator's self-diagnostic system continuously checks to see
whether everything is working properly. In the unlikely event of a
problem, it will pinpoint the trouble and let you know by flashing the
courtesy light. You can often solve the problem on the spot with a call
to your Linear dealer.
Wireless Keyless Entry System
The MDTK Keypad Transmitter is one of Linear's MegaCode series of
wireless radio controls designed for use with automatic garage door and
gate operators. The MegaCode radio format provides unparalleled
security with more than a million different codes.
In
operation, the user enters their unique code on the unit's keypad (1 to
6 digits long) and presses the START/STOP button to activate the door
operator. For up to 30 seconds after the last activation, the MDTK can
be re-triggered by simply pressing the START/STOP button again. This
allows the user to stop or reverse the opener quickly, without having
to re-enter their code.
Features
Activates multiple MegaCode receivers
User selects 1 to 6 digit PIN number or 1 to 6 letter PIN name
Programming is easy via the keypad; MegaCode receiver auto-learns PIN
Backlit keys for easy viewing
Wall mounting hardware (2 screws and anchors) supplied
Power: 9 V battery
Frequency: 318 MHz
Codes: 1-6 digit PIN
Dimensions: 7.5 x 2.5 x .875 inches
1-Channel Block Coded Key Ring Transmitter
The Model ACT-31B 1-Channel Block Coded Key Ring Transmitter is
designed for use with Linear's access control products. The Model
ACT-31B is a single-channel device supplied with a quick-disconnect key
ring. Also included are lithium batteries with a five-year service
life. A unique 10-second time-out feature prevents the system from
being shut down by a single transmitter transmitting continuously.
The transmitter is MegaCode format, which means each transmitter is
factory preprogrammed with one of over 1,000,000 codes, virtually
eliminating the possibility of code duplication. Because the receiver
"learns" each specific code, no unauthorized person can gain access to
the system by reprogramming a transmitter.
Block coded transmitters are factory programmed to a sequential series
of transmitter ID codes. When used with a Linear access controller,
transmitters can be locally or remotely programmed into memory by
entering the first and last codes of the block into the system.
Facility codes can be selected to further customize the system.
Features
* Compatible with all Linear access receivers and controllers
* Supplied with quick-disconnect key ring
* Factory programmed MegaCode format supports over 1,000,000 codes
* Two type 2016 lithium batteries supplied
* RF frequency: 318 MHz
* 1.25" W x 2.25" H x 0.48" D
1-Channel Visor Transmitter The MCT-11 MegaCode
digital transmitter is a wireless radio control designed for use with
automatic garage and gate operators.
MegaCode
transmitters and receivers do not contain a typical "coding switch".
Each transmitter is permanently coded at the factory. The transmitter
sends a unique code when the button is pressed. The receiver is
programmed by learning a transmitter's unique digital code. The
receiver will activate only from the memorized transmitters.
The
transmitter is powered by two Type 2032 coin-cell batteries. They
should last 3 years with normal use. The red indicator on the face of
the transmitter will glow when the unit is activated. If the indicator
lights dimly, or not at all when transmitting, the batteries need to be
replaced. To conserve battery life, an internal timer limits the
transmission duration to 10 seconds if the transmitter button is held
down. 3-Channel Visor Transmitter The MCT-3 3-channel Visor Transmitter is a wireless radio control designed for use with automatic garage and gate operators.
Each of the three transmitter buttons will send a unique code when
pressed. One button can be used to activate the individual's garage
door opener, a second button can operate an access gate, a third button
can activate an additional garage door operator or most Linear 318 MHz
MegaCode wireless receivers.
Liftmaster Accessories
Wireless Keyless Entry System Access
your garage and home without the use of a key or a remote control. The
LiftMaster Security+® Wireless Keyless Entry can open your garage
door using a code that you program directly into the unit. There is
also a temporary password option that enables family, friends, or
service people to enter the garage/your home without giving them your
personal code.
* Security+® rolling code technology assures a new code is sent every time the keypad is used
* Temporary password option enables friends or
service people to enter the garage without giving them your personal
code
* Completely wireless – powered by one 9-volt battery (included)
* Weatherproof flip-up protective cover
* Backlit keypad makes numbers easy to see, even in the dark
* One-button-to-close feature makes it easier than
ever to close your garage door (available on model 377LM only)
* Programs in 2 easy steps
The MHz frequency of your garage door opener will determine what
keyless entry system will work with your system. See below to find out
which keyless entry to order.
Order the 976LM if:
* Your garage door opener has an orange learn button, or
* Your original remote has this logo:
Order the 377LM if:
* Your garage door opener has a purple learn button, or
* Your original remote has silver buttons with glowing blue lights, or
* Your original remote has black buttons and this logo:
1-Button Remote Control Our
basic 1-button remote control isn't so basic. It can operate a single
garage door or gate, and/or turn your garage door opener lights on/off.
You can also use it as an extra remote control to turn on lights or
small appliances inside your home – all from the comfort of your
car. It features Security+® rolling code technology that sends a
brand new code every time it is used. One 5-year 3-volt battery
is included.
The MHz
frequency of your garage door opener will determine what remote
controls will work with your system. Remotes are also available with 2,
3 & 4 buttons. See below to find out which remote to order.
Order the 371LM if:
* Your garage door opener has a purple learn button, or * Your original remote has silver buttons with glowing blue lights, or * Your original remote has black buttons and this logo:
Order the 971LM if:
* Your garage door opener has an orange learn button, or * Your original remote has this logo:
Moore-O-Matic Accessories Note: Replacement parts such as Trolley Slides, Circuit Boards, Gears & Sprockets are no longer available.
Keypad Transmitter The
Delta-3 DTKP Keypad Transmitter is one of Linear's series of wireless
radio controls designed for use with Moore-O-Matic automatic garage door
and gate operators. The Delta-3 radio format provides 256 different
codes.
Features
* Activates multiple Delta-3 receivers
* Backlit keys for easy viewing
* Mounting hardware supplied
* Power: 9 V battery
* Frequency: 310 MHz
* Codes: 1-8 digit PIN
* Dimensions: 7.5 x 2.5 x .875 inches
1-Channel Visor Transmitter One-button, one-channel, 9-Volt battery powered visor transmitter with removable visor clip, 256 selectable codes
Features
* Activates one Delta-3 receiver
* Test/operate LED
* Visor mounting clip supplied
* Power: 9 V battery
* Frequency: 310 MHz
* Codes: 256 (set by dip switches)
* Dimensions: 2.16 x .95 x 3.75 inches
Wireless Keyless Entry System
Order the 377LM if:
Order the 371LM if:
Order the 971LM if:
1-Channel Visor Transmitter